Erik Meade


How to read resistors: ... rs_and_inductors

You can make stranded wire work in breadboards by soldering the leads clipped from resistors to them. I found this very handy for the RCA cable I cut-up for the MakerProject.

You don't have to fully seat your chips to program them (in your STK500) and it makes it much easier to get them out if you don't.

Throwie Communication

I was thinking about a throwie, that would react to IR, initially I pictured pointing a remote at the throwie from yards away and have the throwie repeat the message I used the remote to enter. This implementation had only a range of a few cm.

Morse code

How to read morse code:


Last edited January 31, 2008
Return to WelcomeVisitors